You are here: 
News

IMI Precision Engineering extends its range of IMI Buschjost flange valves with labyrinth technology

New brand IMI Buschjost valve generation: The new series 86480 flanged valves impress with a long service life, excellent functional safety and low resistance to movement.

In the spring of 2017, IMI Precision Engineering, a leading international supplier of drive and fluid technology, will extend its range of IMI Buschjost flange valves. Developed in accordance with the current version of the Pressure Equipment Directive, 2014/68/EU, the larger DN 65, DN 80 and DN 100 valves have been redesigned and are now available as new series 86480, 86500 and 86540. The valves are suitable for use in many sectors, from general machine and plant construction, through the chemical industry to building and power-plant technology.

Based on the force-lifted piston principle the new flange valves are equipped with proven labyrinth technology. Instead of a grooved ring, the labyrinth piston features floating fitted and slotted PTFE guide rings, which are particularly low-wear and long-lasting as well as insensitive to high temperatures and pressure surges against the flow direction. In comparison to the previous model, the new flange valves withstand – depending on the application – more than 200,000 switching cycles, which means service life has more than doubled.

The IMI Buschjost flange valves have an improved position indicator. It is fifty per cent smaller and features a single sensor for both the ‘open’ and ‘closed’ switch positions. In addition, it is programmable making operation significantly easier, reducing operating errors to almost zero.

Operating directly on the valve spindle, the manual override has a very fast response. With a single 180-degree turn, the valve is either fully open or closed. There is a mechanical connection between the spindle and plunger, meaning manual stroke adjustment is no longer required. This makes service and maintenance much quicker and easier.

Available now, the DN 65, DN 80 and DN 100 valves are offered in stainless steel as well as in high-grade ductile cast iron, and are suitable for both PN16 and PN40 pressure stages. From summer 2017, versions with ATEX solenoid and overexcitation, as well as high (200 degrees Celsius) and low-temperature versions (minus 40 degrees Celsius) will be available.

 
News